Investigation effects of titanium powder concentrations mixed in dielectric fluid on material machining removal and surface roughness of SKD61 steel after electrical dischagre machining with reverse electrode polarity
Abstract
Electrical discharge machining (EDM) has found widespread applications in tool , mold and aerospace industries. Therefore, enhancement of the quality of the EDM process has become a major research concern. In this paper, the effect of various titanium powder concentrations on the Material Removal Rate (MRR), tool wear rate (TWR), surface roughness (Ra) in powder mixed electrical discharge machining (PMEDM) have been studied. The workpiece is SKD61steel and electrode made from copper with reverse polarity were used in experimental study. The results showed that titanium powder mixed into the dielectric fluid of EDM can enhance MRR without increasing TWR and Ra.
điểm /
đánh giá
Published
2016-03-17
Issue
Section
ARTILES
Copyright belongs to VNU-HCM “Science and Technology Development” Journal. Any copy or reprinting of any form must be permitted by the Journal.