Tạp chí Khoa học và Công nghệ Trường Đại học Công nghiệp Hà Nội (Bản điện tử)

SCIENCE - TECHNOLOGY

• ADAPTIVE SUPERVISORY CONTROL STRATEGY INTEGRATING FUZZY-LQR/LQI FOR UNMANNED SURFACE VEHICLES (USVs) UNDER VARYING ENVIRONMENTAL DISTURBANCES

  Le Quyet Thang, Tran Xuan Thuy, Tran Ngan Ha

  3

  • pdf (Tiếng Anh)

• APPLICATION OF SECOND HARMONIC RESTRAINT TO IMPROVE THE RELIABILITY OF P3U30 RELAY PROTECTION DURING ENERGIZATION OF 22KV MEDIUM-VOLTAGE DISTRIBUTION LINES

  Ninh Van Nam, Nguyen Luong Thanh, Nguyen Thi Tho

  14

  • pdf (Tiếng Anh)

• CHAOS SUPPRESSION IN PERMANENT MAGNET LINEAR SYNCHRONOUS MOTOR DRIVES USING ADAPTIVE TERMINAL SLIDING MODE CONTROL

  Le Thi Thuy Ngan , Nguyen Thanh Tung, Nguyen Trung Thanh , Luu Thi Hue , Nguyen Hong Quang

  22

  • pdf (Tiếng Anh)

• ELECTROMAGNETIC CHARACTERISTICS COMPARISONOF PERMANENT MAGNET ASSISTED SYNCHRONOUS RELUCTANCE MOTOR AND SYNCHRONOUS RELUCTANCE MOTOR

  Hien Nguyen Thi Minh , Quang Anh Nguyen, Chuong Trinh Trong, Cuong Nguyen Tien , Huy Pham Canh. Viet Nguyen Nga, Vuong Dang Quoc

  30

  • pdf (Tiếng Anh)

• EXACT FEEDBACK LINEARIZATION CONTROL OF A BIDIRECTIONAL DC-DC CONVERTER FOR LI-ION BATTERY/SUPERCAPACITOR HYBRID ENERGY STORAGE SYSTEMS IN ELECTRIC VEHICLES

  Bui Van Huy , Quach Duc Cuong , Nguyen Van Doai, Bui Thi Thu Ha , Tran Duc Hiep , Nguyen Son Tung

  37

  • pdf (Tiếng Anh)

• INVESTIGATION INTO THE EFFECT OF TILT ANGLE ON THE PERFORMANCE OF SOLAR PHOTOVOLTAIC SYSTEMS IN NGHE AN

  Nguyen Van Thieu, Kieu Duy Hung, Duong Quoc An, Le Quang Sang

  47

  • pdf (Tiếng Anh)

• LINEAR PARAMETER-VARYING MODEL PREDICTIVE CONTROL FOR QUADCOPTER ATTITUDE AND TRAJECTORY TRACKING

  Van Phuong Pham , Hai Le Xuan, Tran Van Thuong , Phung Hoang , Pham Thi Hong Hanh

  52

  • pdf (Tiếng Anh)

• MAGNETIC CIRCUIT MODELING OF THE HALL EFFECT CURRENT SENSOR

  Bui Anh Tuan, Nguyen Tien Dung

  58

  • pdf (Tiếng Anh)

• DESIGN AND ANALYSIS OF AN INTERFERENCE GENERATION CIRCUIT FOR A HANDHELD UAV SUPPRESSION DEVICE

  Tran Xuan Tinh , Nguyen Trong Ha, Sai Van Thuan, Nguyen Trung Minh , Tran Ngoc Hieu

  64

  • pdf (Tiếng Anh)

• SURVIVABILITY ANALYSIS OF UAVS WITH CYLINDRICAL RANDOM TRAJECTORY UNDER DIRECT-FIRE THREATS: A PROBABILISTIC APPROACH

  Nguyen Hoang Viet, Pham ThiPhuong Anh, Nguyen Vu

  72

  • pdf (Tiếng Anh)

• TECHNO-ECONOMIC BI-LEVEL OPTIMIZATION OF BATTERY STORAGE FOR WIND FARM EXPANSION

  Bui Xuan Luc , Dinh Ngoc Sang, Nguyen Tung Linh , To Xuan Bao , Truong Viet Anh

  77

  • pdf (Tiếng Anh)

• ADAPTTRACK: AN ENHANCED BYTETRACK APPROACH USING A VELOCITY-ADAPTIVE KALMAN FILTER

  Hai Hoang Hong , Long Nguyen Huu, Dung Nguyen Tien ,Nhat Minh Phung , Long Hoang Duc

  84

  • pdf (Tiếng Anh)

• APPLICATION OF CAD/CAE TO OPTIMIZING EXTRUSION DIE FOR DYL8812-3 ALUMINUM ALLOY PRODUCT

  Pham Van Nguyen , Nguyen Trong, Mai Tran Duc Quy , Nguyen Truong Giang , Dongyi Lin

  89

  • pdf (Tiếng Anh)

• APPLICATION OF THERMAL SPRAY TECHNOLOGY IN THE REFURBISHMENT OF AUTOMOTIVE CAMSHAFT COMPONENTS

  Pham Van Lieu

  95

  • pdf (Tiếng Anh)

• DYNAMICS-BASED STRUCTURAL WEIGHT OPTIMIZATION OF A LARGE-SCALE 3D CONCRETE PRINTER FRAME WITH TIME-DEPENDENT PRINTHEAD DISPLACEMENT CONSTRAINTS

  Duc Khoi Trieu, Van Binh Phung, Reynolds Addo-Akoto , Hong Nhu To

  103

  • pdf (Tiếng Anh)

• EXPERIMENTAL INVESTIGATION OF COMPLIANT POLISHING OF FREE-FORM SUS 304 SURFACES USING THE TAGUCHI METHOD

  Tran Viet Kieu, Nguyen Van Dai , Chu Ba Lam, Hoang Minh Duc, Vu Van Chung, Than Van Hung , Pham Thi Thieu Thoa

  112

  • pdf (Tiếng Anh)

• IMPROVING SURFACE ROUGHNESS PREDICTION RELIABILITY USING TOOL WEAR-BASED MODELING

  Van-Canh Nguyen, Dung Hoang Tien, Quang-Tu Ngo, Nguyen Chi Bao, Nguyen Thanh Cong , Nguyen Dang Kham

  121

  • pdf (Tiếng Anh)

• KINODYNAMIC RRT PLANNING WITH BACKSTEPPING TRACKING FOR CONSTRAINED MOBILE ROBOT MOTION IN CLUTTERED ENVIRONMENTS

  Bui Thanh Lam, Nguyen Minh Quang, Nguyen Tien Thanh, Luu Vu Hai

  126

  • pdf (Tiếng Anh)

• MATHEMATICAL REGRESSION MODELING OF THE LASER DIRECT METAL DEPOSITION PROCESS FOR INCONEL 718

  Nguyen Van Toan, Mai Xuan Hai, Doan Tat Khoa

  136

  • pdf (Tiếng Anh)

• OPTIMIZATION AND PREDICTIVE MODELING OF SURFACE ROUGHNESS IN CNC MILLING OF 40Cr ALLOY STEEL USING TAGUCHI-ANN APPROACH

  Phang Xuan Son, Vu Thi Hue, Pham Ngoc Thanh

  143

  • pdf (Tiếng Anh)

• SIMULATION-BASED OPTIMISATION OF URBAN TRAFFIC FLOW USING MULTI-CRITERIA AND FORECASTING MODELS

  Nguyen Quoc Tuan, Giap Van Quy

  146

  • pdf (Tiếng Anh)

• STRUCTURE AND PROPERTIES OF AlCrN AND TiAlN THIN FILMS COATED ON GAS NITRIDED SKD61 STEEL BY CATHODIC ARC PLASMA DEPOSITION

  Nguyen Van Thanh , Van Thanh Doan , Huy Van Vu, Pham Duc Cuong, Duong Van Thiet , Trinh Van Trung

  161

  • pdf (Tiếng Anh)

• RECONSTRUCTION OF HIGH-CURVATURE FREE-FORM SURFACES FROM REVERSE ENGINEERING DATA USING CURVATURE FIELD ANALYSIS AND VARIATIONAL OPTIMIZATION

  Thien Nguyen Van , Dung Le Van, Phan Nguyen Huu, Minh Dao Binh , Hung Do Duy

  167

  • pdf (Tiếng Anh)

• A STUDY ON THE DEVELOPMENT OF THE CHARACTERISTIC CURVES OF AN ELECTRORHEOLOGICAL DAMPER FOR PASSENGER CARS

  Kieu Duc Thinh, Doan Duy Duc, Bui Trung Duc

  180

  • pdf (Tiếng Anh)

• A STUDY ON THE IMPACT OF IGNITION TIMING ON THE PERFORMANCE AND COMBUSTION CHARACTERISTICSOF HYDROGEN-FUELED ENGINES AT VARIOUS ENGINE SPEEDS

  Pham Van Trong, Nguyen Duy Vinh, Dinh Xuan Thanh

  185

  • pdf (Tiếng Anh)

• APPLICATION OF SIMCENTER AMESIM IN MODELING AND EVALUATING THE EFFECTIVENESS OF BRAKE BLENDING STRATEGIES ON ELECTRIC VEHICLES

  Nguyen Thanh Bac

  190

  • pdf (Tiếng Anh)

• EXTRAPOLATIVE PREDICTION OF MAIN INJECTION FLOW RATE IN A COMMON-RAIL DIESEL INJECTOR USING SUPPORT VECTOR REGRESSION

  Nguyen Xuan Khoa, Duong Ngoc Thiep, Nguyen Tien Han

  196

  • pdf (Tiếng Anh)

• MODELING AND EVALUATION OF INSTANTANEOUS FUEL CONSUMPTION USING VEHICLE SPECIFIC POWER: A COMPARATIVE STUDY OF REGRESSION MODELS

  Bui Van Chinh, Khanh Nguyen Duc

  201

  • pdf (Tiếng Anh)

• A SIMULATION STUDY ON THE EFFECT OF BOOST PRESSURE ON COMBUSTION CHARATERISTICS OF BIOGAS ENGINE

  Nguyen Thanh Binh, Trinh Xuan Phong, Nguyen Phi Truong

  210

  • pdf (Tiếng Anh)

• OPTIMIZING SEAT OSCILLATION THROUGH THE DYNAMIC MODEL OF A PURPLE ONION HARVESTING SYSTEM

  Nguyen Thuan Hai Dang , Le Trung Hau, Le Duy Long , Tran Phuc Hoa

  217

  • pdf (Tiếng Anh)

• STATE-OF-CHARGE ESTIMATION OF A LITHIUM-ION TRACTION BATTERY PACK USING THE EXTENDED KALMAN FILTER IN A BATTERY MANAGEMENT SYSTEM

  Vu Hai Quan , Karpukhin Kirill Evgenievich, Nguyen Trong Duc, Bui Van Hai, Karpukhin Filipp Kirillovich

  224

  • pdf (Tiếng Anh)

• ROBUST CONTROLLER DESIGN FOR ACTIVE SUSPENSION SYSTEMS IN CARS

  Vu Van Tan, Ta Nhu Thuan

  232

  • pdf (Tiếng Anh)

• EVALUATION OF THEORETICAL MODELS FOR PREDICTING THERMAL CONDUCTIVITY OF BO CHINH GINSENG ROOT BASED ON EXPERIMENTAL DATA

  Nguyen Hay, Nguyen The Bao, Ngo Thi Minh Hieu, Le Quang Huy

  238

  • pdf (Tiếng Anh)

• MODELLING FOR INFRARED VACUMM DRYING PROCESS

  Minh Tuan Hoang, Thi Thu Hang Tran

  249

  • pdf (Tiếng Anh)

• A MACHINE LEARNING BASED MULTI-ATTRIBUTE RECOMMENDATION SYSTEM FOR WOMEN’S APPAREL USING RANDOM FOREST

  Nguyen Thi Le, Duong Thi Thuy Van

  256

  • pdf (Tiếng Anh)

• INVESTIGATION OF MECHANICAL AND FUNCTIONAL PROPERTIES OF COATED FABRICS FOR MATERIAL SELECTION IN FALL-PROTECTION AIRBAGS

  Le Thi Mai Anh

  265

  • pdf (Tiếng Anh)

• MODELING THE IMPACT OF MARKER PARAMETERS ON FABRIC CONSUMPTION IN GARMENT MANUFACTURING

  Thuy Do Thi, Huyen Pham Thi

  275

  • pdf (Tiếng Anh)

• STUDY ON THE EFFECT OF POLYESTER/COTTON FIBER RATIO IN TEXTILE FIBERS ON SOME OF THE THERMAL AND MOIST COMFORT PROPERTIES OF INTERLOCK FABRICS

  Tho Luu Thi, Van Hai Nguyen, Thanh Nam Pham

  281

  • pdf (Tiếng Anh)

• EFFECTS OF DIFFERENT NUTRIENT MEDIA ON THE GROWTH AND DEVELOPMENT OF LEVEL III SPAWN OF THE GOLDEN OYSTER MUSHROOM (PLEUROTUS CITRINOPILEATUS)

  Nguyen Duc Hai, Nguyen Chung Ha, Pham Thi Mai Huong,Ha Thi Dung, Trinh Thi Hai, Vu Thi Cuong, Vu Dinh Giap, Nguyen The Huu, Nguyen Manh Ha, Do Thi Hanh

  286

  • pdf (Tiếng Anh)

• OPTIMIZATION OF SCHISANDRA HENRYI EXTRACTION USING RESPONSE SURFACE METHODOLOGY

  Hoang Thu Thuy , Ngo Thi Phuong , Ta Thi Thao Cam Thi Inh , Do Thi Thanh Huyen , Le Minh Ha

  293

  • pdf (Tiếng Anh)

• VALORIZATION OF PHOSPHORUS SLAG FROM TANG LOONG FOR SUSTAINABLE CONSTRUCTION AND INDUSTRIAL APPLICATIONS

  Pham Thi Minh, Nguyen Van Chien, Dam Xuan Thang

  302

  • pdf (Tiếng Anh)