Tập 61. Số 3 (2025)

RESEARCH AND DEVELOPMENT

• A NOVEL NULL-STEERING BEAMFORMER BASED ON BAT ALGORITHM

  Tong Van Luyen

  3

  • pdf
• ELECTRON TRANSPORT COEFFICIENT IN SiH4-He MIXTURES FOR FLUID MODELS

  Giang Hong Bac, Do Anh Tuan, Pham Xuan Hien, Phan Thi Tuoi

  10
• PATH-FOLLOWING CONTROL FOR UNDER-ACTUATED AUTONOMOUS SURFACE VEHICLES BASED ON NONLINEAR MODEL PREDICTIVE CONTROL

  Cao Đức Sáng, Trần Văn Quốc, Lê Trần Thắng, Nguyễn Trọng Khuyên

  14

  • pdf (Vietnamese)
• ANTI-EXAM CHEATING DETECTION SYSTEM

  Đoàn Thị Hương Giang, Hồ Đoàn Bảo Châu

  21

  • pdf (Vietnamese)
• INTEGRATING THE SEMANTIC INFORMATION INTO PLANNING FOR AUTONOMOUS ROBOT: A SURVEY

  Nguyễn Văn Hùng, Trương Xuân Tùng, Nghiêm Hoàng Nam, Nguyễn Văn Tuấn

  28

  • pdf (Vietnamese)
• CLASSIFICATION OF FETAL STATUS BASED ON CARDIOTOCOGRAM DATA USING ALEXNET-SVM MODEL

  Trần Thị Huế

  37

  • pdf (Vietnamese)
• DESIGN OF ADAPTIVE OUTPUT FEEDBACK CONTROLLER BASED ON HIGH-ORDER SLIDE OBSERVER FOR MISSILE LAUNCHERS

  Nguyễn Tuấn Anh, Trần Thị Nga

  43

  • pdf (Vietnamese)
• STABLE CONTROLLER DESIGN FOR ELECTRO-OPTICAL OBSERVATION STATION ON THE SURFACE SHIP SUBJECT TO THE IMPACT OF SEA WAVE CONDITIONS

  Hoàng Quốc Minh, Nguyễn Ngọc Tuấn

  47

  • pdf (Vietnamese)
• USING QUATERNION OPERATORS IN SOLVING THE LINE-OF-SIGHT STABILITY CONTROL PROBLEM FOR CAMERAS MOUNTED ON MOVING PLATFORMS

  Trương Tất Thuấn, Vũ Xuân Huy, Nguyễn Vũ

  54

  • pdf (Vietnamese)
• COMPARE THE PERFORMANCE OF BACKPROPAGATION AND FORWARD-FORWARD ALGORITHM IN IMAGE RECOGNITION PROBLEM

  Trần Thanh Hùng, Đỗ Ngọc Sơn

  64

  • pdf (Vietnamese)
• EVALUATING GEOMETRIC ACCURACY AND MATERIAL USAGE EFFICIENCY WHEN SHAPING HOLLOW-CONE PARTS FROM HIGH STRENGTH ALLOY STEEL BY WAAM TECHNOLOGY

  Lê Văn Thảo, Nguyễn Văn Cảnh, Nguyễn Thùy Dương

  69

  • pdf (Vietnamese)
• FUZZY HIERARCHICAL SLIDING CONTROLLER FOR QUADRUPED ROBOT WITH FAULT

  Nguyễn Văn Trường, Hoàng Tiến Dũng, Dương Đại Nhân, Phạm Thu Hà, Trần Quốc Bảo, Nguyễn Minh Sơn

  77

  • pdf (Vietnamese)
• INVESTIGATION AND EVALUATION OF THE INFLUENCE OF CERTAIN TECHNOLOGICAL FACTORS ON SURFACE ROUGHNESS IN WIRE CUTTING OF HARD ALLOYS

  Phạm Văn Bổng, Nguyễn Hoàng Thông, Hoàng Văn Dũng

  84

  • pdf (Vietnamese)
• INVESTIGATION TO IMPROVE THE TECHNOLOGY FOR PRODUCING EXPLOSIVES THAT GENERATE COLUMNS OF COLORED WATER

  Đào Văn Vượng, Đào Văn Đoan

  88

  • pdf (Vietnamese)
• FINITE ELEMENT MODEL OF FOUR-LAYER HYBRID BEAM WITH SHEAR CONNECTORS

  Đỗ Xuân Kiên, Vũ Công Luận, Tạ Đức Tâm

  96
• OPTIMIZING SOME DESIGN PARAMETERS TO BUILD A MACHINE MODEL TO SEPARATE PLASTIC BAGS FROM HOUSEHOLD WASTE

  Nguyen Trong Hai , Bui Ngoc Tuyen

  102

  • pdf
• OPTIMIZING INDUSTRIAL ROBOT SELECTION BASED ON MULTI-CRITERIA DECISION-MAKING TECHNIQUES USING TOPSIS, MOORA AND EDAS

  Nguyễn Thị Nga, Vũ Thanh Hải, Đào Thị Mơ, Tống Thị Lan, Nguyễn Thị Thu Hà

  108

  • pdf
• APPLICATION OF SELF-ORGANIZING WIDE LEARNING SYSTEM FOR TWO LINK MANIPULATOR

  Phạm Đức Hùng, Trần Đình Hạnh, Đỗ Văn Tân, Phan Đình Hiếu, Phạm Ngọc Thắng

  114

  • pdf (Vietnamese)
• SIMULATION OF ENGINE ADAPTATION IN A HYBRID RENEWABLE ENERGY SYSTEM PRODUCING ELECTRIC AND HYDROGEN

  Nguyễn Hữu Hiếu, Bùi Văn Ga, Lê Khắc Bình

  120

  • pdf (Vietnamese)
• STUDY ON THE IMPACT OF PLATINUM LOADING ON THE CATALYST LAYER ON THE PERFORMANCE OF FUEL CELLS USING PHOSPHORIC ACID-DOPED ELECTROLYTE MEMBRANE OPERATING AT HIGH TEMPERATURES

  Đỗ Văn Trấn, Nguyễn Tường Vi , Nguyễn Tiến Hán

  131

  • pdf (Vietnamese)
• RESEARCH ON PERFORMANCE AND EMISSIONS OF A GASOLINE ENGINE RUNNING ON AMMONIA-GASOLINE DUAL FUEL

  Hoàng Văn Bằng, Lương Đình Thi , Phan Thành Huy, Hà Văn Đức

  139

  • pdf (Vietnamese)
• ANALYSIS OF UNCERTAINTY PARAMETERS FOR AN ELECTRO-HYDRAULIC ACTUATOR OF ACTIVE ANTI-ROLL BAR SYSTEM IN CARS

  Phạm Trung Dũng, Vũ Văn Tấn, Trương Mạnh Hùng, Tạ Thị Thanh Huyền, Lê Gia Minh, Nguyễn Minh Nam, Phạm Văn Thịnh

  144

  • pdf (Vietnamese)
• STUDYING THE EFFECTS OF SOME STRUCTURAL PARAMETERS ON THE TENSION STRENGTH AND ELONGATION AT BREAK OF WEFT KNITTING FABRIC

  Lưu Thị Tho, Nguyễn Thị Kiều Anh

  152

  • pdf (Vietnamese)
• DESIGN BRA MODELS FOR BREAST CANCER PATIENTS BY 3D METHOD

  Nguyễn Thanh Tùng, Trần Thị Minh Kiều

  160

  • pdf (Vietnamese)
• EXTRACTION OF PECTIN FROM POMELO PEEL UNDER LOW PRESSURE CONDITION

  Phạm Thị Nam Bình, Nguyễn Mạnh Hà, Hà Thị Hương

  167

  • pdf (Vietnamese)
• PREPARATION AND CHARACTERIZATION OF FERROUS SULFATE LIPOSOME FORMULATION: EFFECT OF IRON-PHOSPHOLIPID RATIO

  Võ Ngọc Bình, Đào Thu Nga, Trần Thị Yến, Ngô Quốc Anh

  172

  • pdf (Vietnamese)
• INCREASING TENSILE STRENGTH OF THE BLEND TPU/PP BY INDUSTRIAL-SCALE GRAPHENE NANOPLATELETS

  Nguyễn Thị Thanh Nhàn

  179

  • pdf (Vietnamese)
• HOẠT TÍNH KHÁNG VIÊM VÀ CHỐNG OXY HÓA IN VITRO CỦA CAO CHIẾT TỪ LÁ CÂY DẺ TRÙNG KHÁNH (CASTANEA MOLLISSIMA) Ở VIỆT NAM

  Đàm Thị Bích Hạnh, Ngũ Trường Nhân, Đỗ Tiến Lâm, Phan Hoàng Thái Bảo, Vũ Thị Thu Lê, Lục Quang Tuấn, Đỗ Văn Huy, Nguyễn Thị Kim An

  186

  • pdf (Vietnamese)
• INVESTIGATION OF POLYPHENOL, FLAVONOID CONTENT, ANTIOXIDANT AND ANTIMICROBIAL ACTIVITIES OF LIPPIA NODIFLORA LEAVES (VERBENACEAE)

  Cao Thị Huệ, Nguyễn Thị Diễm, Lục Quang Tấn, Phạm Ngọc Quỳnh, Trần Thị Phương Liên, Trần Thị Hồng, Hà Thị Dung

  191

  • pdf (Vietnamese)
• EFFECT OF WASTE ENGINE OIL AND NANOCLAY I28E ON THE TECHNICAL PROPERTIES OF BITUMEN

  Đặng Hữu Trung

  199

  • pdf (Vietnamese)
• DEVELOPMENT OF LOW- GLYCEMIC FOOD PRODUCTS WITH PHOSPHORYLATED BANANA STARCH

  Nguyễn Phan Hằng, Vũ Minh Tân, Nguyễn Thị Kim An, Phạm Thị Mai Hương, Phạm Ngọc Anh, Phạm Thị Thu Hà, Nguyễn Trung Đức, Nguyễn Thanh Tùng

  205

  • pdf (Vietnamese)