Synthesis of inorganic polymer sodium aluminum silicate system based on sodium silicate and application as film forming agent for silicate paint
DOI:
https://doi.org/10.51316/jca.2022.062Abstract
In this study, sodium aluminum silicate inorganic polymer was synthesized by sol-gel method. The parameters affecting the polymer formation were also investigated. Polymers with optimal parameters have been applied to make high temperature resistant inorganic paints. Modified infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD) methods were used to investigate the characteristics of the paint film. Furthermore, the mechanical and mechanical properties of heat-resistant inorganic paints and their heat resistance were also investigated.Downloads
References
John Wiley & Sons Published Date : 2007, Textbook of Polymer Science, John Wiley, New York, 1984.
M.F. Ashby, D.R.H. Jones, Engineering Materials 1, An Introduction to Their Properties and Applications, 3rd. ed., Butterworth-Heinemann, Woburn, UK, 2005. https://doi.org/10.1016/C2009-0-64288-4
Y.Q. Xie and J. H. Liu, J. Beijing For. Univ. 34(1) (2012) 4–5. https://doi.org/10.1039/C5RA13996A.
M.Shabir Mahr, T.Hubert, B.Schartel, H.Bahr, M.Sabel and H.Militz J.Sol-Gel Sci.Technol (2012) 64(2) 452–464.
M.Niu, O.Hagman, X.D.Wang, Y.Q.Xie, O.Karlsson and L. L.Cai, BioResources (2014) 9(2) 2415–2430.
D.R.Askeland, P.P.Phule, 2006,The Science and Engineering of Materials, 5th ed., Thomson, Toronto. https://10.1007/978-1-4613-0443-2
Cuong Le Manh, Huong Thu Le, Journal of Analytical Methods in Chemistry (2021). https://doi.org/10.1155/2021/5510193
J.Pinkas, Ceram. Silik, 49 (2005) 287–298.
Z.L.Yang, B.Y.Gao, W.Y.Xu, B. C. Cao and Q.Y.Yue, J. Hazard, 189(1–2) (2011) 203–210.
R.Li, J.Pan, W.L.Qin, J.Yang and Y. L. He, Desalination, 351 (2014) 37–42.
B. Y. Gao, B. Liu, T. Chen and Q. Y. Yue, J. Hazard. Mater., 187(1–3) (2011) 413–420. https://doi.org/10.1039/C5RA13996A
Svetlana Nikolaevna Kislitsyna, Yerkebulan Bisengalievich Mazhitov, Case Studies in Construction Materials 9 (2018) e00173. https://doi.org/10.1016/j.cscm.2018.e00173.
A.C. Lopes, P. Martins, S. Lanceros-Mendez, Progress in surface science 89 (2014) 239-277. https://doi.org/10.1016/j.progsurf.2014.08.002
J.Rocha, M.W. Anderson, Eur. J. Inorg. Chem (2000) 801–818.
Padmaja Krishnan, Min-HongZhang, YuhanCheng, Dipo Tamliang Riang, Liya E.Yu,
Construction and Building Materials 43 (2013) 197-202. https://10.1016/j.conbuildmat.2013.02.012
OssWald, J.; Fehr, K.T(2006). FTIR spectroscopic study on liquid silica solutions and nanoscale particle size determination. J. Mater. Sci. 2006, 41, 1335-1339 https://doi.org/10.1007/s10853-006-7327-8
Wojciechowki, K; Zukowska, G.Z.; Korczagin, I.; Malanowski, Prog. Org. Coat 85 (2015) 123-130. https://doi.org/10.1016/j.porgcoat.2015.04.002
Di Crescenzo, M.M Zendri,E.; Rosi,F.; Miliani,. e-Preserv. Sci. 10 (2013) 10-18.
Sanosh, K.P.; Pal, S.; Haq, E.U.; Licciulli., Appl. Catal. A 485 (2014) 157-162. https://doi.org/10.1016/j.apcata.2014.08.002
Pal, S.; Laera, A.M.; Licciulli, A.; Catalano, M.; Taurino, Ind. Eng. Chem. Res. 53 (2014) 7931-7938. https://doi.org/10.1021/ie404123f
Miller, F.L.; Wilkins, C.H., Anal. Chem. 24 (1956) 1253-1294. https://doi.org/10.1021/ac60068a007
Manh-Cuong Le et al,. Frontiers in Chemistry 9, (2021) 738969. https://doi.org/10.3389/fchem.2021.738969
