Synthesis of Fe-Cu/MCM-41 nanocomposite and its application for treatment of Reactive Red 195

Authors

  • Tran Thi Hoa
  • Le Van Dung
  • Le Hong Ha
  • Nguyen Ba Manh

DOI:

https://doi.org/10.51316/jca.2020.025

Abstract

A series of Fe-Cu/MCM-41 nanocomposites were synthesized by dispersion of Fe-Cu on mesoporous silica MCM-41 obtained from natri silicat. The physical properties of Fe-Cu/MCM-41 were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), N2 adsorption-desorption isotherm (BET) analysis. Effects of pH and H2O2 concentration were investigated. The best conditions were found to be pH of 3; 0.3 g.L−1 catalyst and reaction time of 60 min at room temperature. The novel Fe-Cu/MCM-41 composite exhibited highly photocatalytic performance of RR-195 degradation and the conversion reached to the value of 98.13 % for the 10Fe-2Cu/SBA-15 after 60 min of reaction.

Downloads

Download data is not yet available.

References

Tschirch, R. Dillert, D. Bahnemann, B. Proft, A. Biedermann, B. Goer. Res. Chem. Intermed. 34 (4) (2008) 381-392.

https://doi.org/10.1163/156856708784040588

Th. Maggos, J. G. Bartzis, M. Liakou, C. Gobin. J. Hazard. Mater., 146 (3) (2007) 668-673. https://doi.org/10.1016/j.jhazmat.2007.04.079

C. J. Chang, K. L. Huang, J. K. Chen, K. W. Chu, M. H. Hsu. Chem. Eng, 55 (2015) 82-89. https://doi.org/10.1016/j.jtice.2015.04.024

N. Mandzy, E. Grulke, and T. Druffel. Powder Technology, vol.160, (2005) 121–126. https://doi.org/10.1016/j.powtec.2005.08.020

Q. Zhang, J. B. Joo, Z. Lu. Nano Research, vol. 4, (2011) 103–114. https://doi.org/10.1007/s12274-010-0058-9

6. Y. Ling, M. Long, P. Hu, Y. Chen, and J. Huang, . Journal of Hazardous Materials, vol. 264, (2014) 195–202. https://doi.org/10.1016/j.jhazmat.2013.11.008

Xuan Nui Pham, Tuan Dat Pham, Ba Manh Nguyen, Hoa Thi Tran, and Dinh Trong Pham. Journal of Chemistry Volume (2018) https://doi.org/10.1155/2018/8418605

Xuan Nui Pham, Ba Manh Nguyen, Hoa Tran Thi, Huan Van Doan. Advanced Powder Technology 29 (2018) 1827–1837. https://doi.org/10.1016/j.apt.2018.04.019

Tuan T. Nguyen, Giang H. Le, Chi H. Le, Manh B. Nguyen, Trang T. T. Quan, Trang T. T. Pham and Tuan A. Vu. Materials Research Express, (2018), 5 115005. https://doi.org/10.1088/2053-1591/aadce1

Martin Hartmann, Simon Kullmanna and Harald Keller. J. Mater. Chem. (2010) 9002-9017. https://doi.org/10.1039/C0JM00577K

Shouwei Zhang, Meiyi Zeng, Jiaxing Li, Jie Li, Jinzhang Xu and Xiangke Wang. Journal of Materials Chemistry A, Received 9th November 2013 Accepted 3rd January 2014. https://doi.org/10.1039/C3TA14604A

Lu, J., Jiao, X., Chen, D., Li, W., J. Phys. Chem. C, 113, (2009) 4012–4017. https://doi.org/10.1021/jp810583e

Xin-jiang Hu, Yun-guo Liu, Guang-ming Zeng, Hui Wang, Shao-hong You, Xi Hu, Xiao-fei Tan, An-wei Chen, Chemosphere, (2015) 35-41. https://doi.org/10.1016/j.chemosphere.2015.01.013

Bo Yang, Zhang Tian, Li Zhang, Yaopeng Guo, Shiqiang Yan. Journal of Water Process Engineering, (2015) 101–111. https://doi.org/10.1021/acsanm.9b01608

Downloads

Published

30-07-2020